The Victory Varipoint models
All Varipoint models are equipped with an unique red dot for use in
bright daylight as well as in twilight or during night.
This makes them the most versatile models for almost every hunting situation.
Victory Varipoint 1,1 - 4 x 24 T*
Victory Varipoint 1,5 - 6 x 42 T*
Victory Varipoint 2,5 - 10 x 42 T*
Victory Varipoint 2,5 - 10 x 50 T*
Victory Varipoint 3 - 12 x 56 T*
LotuTec coating
The
illumination
is controlled by a combined flat switch and rotary
knob, left side of the center tube
.
Outer objective and eyepiece lenses with
LotuTec coating
. Water repelling pearl-off effect and for simplified cleaning.
Automatic adjustment of the luminous intensity
(modells from 42 mm objective aperature) of the red dot due to the surrounding light. Manual control still possible.
Reticle 0
Absehen 60
Besides
reticle
0 (only red dot) the reticle 60 is available with additional bars. The dot is located in the second image plane, the bars are in the first image plane which offers the following advantages:
The size of the
dot
remains constant for the total range of magnification. It is clearly visible under all conditions with well balanced subtension.
The
dot diameter
at 100 m can be calculated for all models by "
22 cm divided by magnification
". Example: 3x magnification means approx. 7.3 cm at 100 m. Switched off or without batteries a permanent black dot is visible.
The
lines
of the reticle 60 in the 1st image plane
are magnified together with the image. They become thicker and better visible with higher magnifications.
Besides they deliver a good feeling for the distance and allow a distance estimation.