In the Easy Mode, users are guided step-by-step through all the main steps of a measurement: from the selection of the measuring conditions to stylus calibration to the measurement.
Auto feature analysis (AI function)
ACCTee PRO automatically recognizes the basic features – point, line, circle. Depending on the selected feature, the program also shows a pre-selection of appropriate analysis functions.
ACCTee PRO also contains an integrated help function that offers both context-based explanations as well as an index and key word look-up. Furthermore, the software features mouse-over help with short explanations.
ACCTee Pro can perform a tolerance analysis for individually selectable parameters. The results are shown as an OK/Not OK symbol in the report.
In the event of an error, the software immediately provides users with a list of probable causes with images and short texts.
Re-evaluate without re-measuring: changes to the analysis settings and their impact are immediately visible (patented).
Easy plan/actual comparison
Measurement data and nominal profile (IGES and DXF) can be quickly compared with ACCTee PRO. The data is optimally aligned using the best fit set-up. An aspherical analysis function is optionally available.
Playback function – CNC repeat measurement at the push of a button
ACCTee Pro delivers time benefits of up to 40 % for analyses because a repeat measurement can be initiated at the push of a button via the playback function.
Expert Mode – offline programming
The Expert Mode allows users to generate CNC programs away from the machine. This considerably increases machine capacity.
Quickly to a customized report
With just a few clicks, you can generate a report in ACCTee PRO that meets your needs. Graphic and numerical displays can be ideally combined. Change the filter and analysis settings without repeating the measurement: the new report is automatically generated immediately. Furthermore, part photos and company logos can be easily added to the report.
ACCTee PRO software features a number of software tools to check surface parameters, contours and form features. All data for a workpiece is entered into the same document: measurement data, measuring conditions, analysis conditions, CNC measuring program and report layout. This makes it possible to export all relevant data and graphics, e.g. roughness and contour data, in one report.
Real Engine – patented edge function
Even when large part deviations in serial measuring operations occur, the part is measured in CNC operation, the real contour/edge found and the real values exported. False measurements, which occur with conventional methods, are not possible.
Serial measurements can be exported and evaluated via the qs-STAT interface or via Excel.
Many functions already standard