
Backflush Instrument with 20 gauge / 0.9 mm blunt needle.
- 000000-2703-028
Additional ZEISS products and solutions will be added over time.

Backflush Instrument with 20 gauge / 0.9 mm blunt needle.

Backflush Instrument with 23 gauge / 0.6 mm blunt needle.

Backflush Instrument with 23 gauge / 0.6 mm brush needle and active aspiration.

Backflush Instrument with 23ga / 0.6 mm soft-tip cannula and active aspiration

Backflush Instrument with 25 Ga / 0.5 mm blunt needle and active aspiration.

Backflush Instrument with 25Ga / 0.5 mm brush needle and active aspiration

Backflush Instrument with 25ga / 0.5 mm soft-tip cannula and active aspiration

Backflush Instrument with 27 Ga / 0.4 mm blunt needle and active aspiration

Backflush Instrument with 27Ga / 0.4 mm brush needle and active aspiration

Backflush Instrument with 27ga / 0.4 mm soft-tip cannula and active aspiration

Backflush Needle with tapered tip from 23 gauge/0.6 mm to 27 gauge/0.4 mm and luer lock connector for use with 1281.C handpiece.

Backflush Needle with tapered tip from 23 gauge/0.6 mm to 27 gauge/0.4 mm for use with classic DORC backflush handpiece.

Bimanual irrigation/aspiration set.(21 gauge / 0.9 mm)

Bipolar Coagulation Forceps, 12 cm, angled, excl. cable

Cleaning adapter for phaco needle.

Cleaning adaptor for phaco sleeve.

Combined 23G Eckardt Multi-Fiber Endoillumination Probe / Chandelier (23 gauge / 0.6mm)

Curved Si-Sleeve Tip 21G (0.80mm); Asp. Port 0.30mm

Curved Si-Sleeve Tip 22G (0.70mm); Asp. Port 0.30mm

Curved tip with silicone sleeve for universal I/A handpiece 1273.EH

D.A.L.K. Spatula Dissection Set

Diamond Dusted Sweeper. (23 gauge/0.6 mm)

Diamond Duster Sweeper. (25 gauge/0.5 mm)

Diathermy cable
Not all products, uses, treatment options and protocols referenced are officially approved in every market or supported by a product’s intended use in every market. Approved labeling and instructions may vary from one country to another. For country-specific product information, see the appropriate country website. Product specifications are subject to change in design and scope of delivery as a result of ongoing technical development.