Xradia 410 Versa bridges the gap between high-performing X-ray microscopes and less powerful computed tomography (CT) systems. Delivering non-destructive 3D imaging with industry best resolution, contrast, and in situ capabilities, Xradia 410 Versa enables you to achieve groundbreaking research for the widest range of sample sizes. Enhance imaging workflows with this powerful, cost-efficient "workhorse" solution, even in diverse lab environments.
Ask your ZEISS contact about ZEISS Xradia 410 Versa now!
Xradia 410 Versa X-ray microscope delivers cost-efficient, flexible 3D imaging to enable you to address a wide range of samples and research environments. Non-destructive X-ray imaging preserves and extends the use of your valuable samples over time. The instrument achieves 0.9 μm true spatial resolution with minimum achievable voxel size of 100 nm. Advanced absorption and phase contrast (for soft or low-Z materials) provide you with more versatility to overcome the limitations of traditional computed tomography (CT) approaches.
Xradia Versa solutions extend scientific research beyond the limits of projection-based micro- and nano-CT systems. Where traditional tomography relies on a single stage of geometric magnification, Xradia 410 Versa features a unique two-stage process based on synchrotron-caliber optics. It is easy to use, with flexible contrast. Breakthrough Resolution at a Distance (RaaD) enables you to maintain submicron resolution across a broad spectrum of sample dimensions in native environments and within a wide range of in situ rigs. Non-destructive multi-length scale capabilities allow you to image the same sample across a wide range of magnifications, making it possible to uniquely characterize the evolution of material microstructure properties between sequential treatments (4D) or as they are subjected to simulated environmental conditions (in situ).
Additionally, the Scout-and-Scan control system enables an efficient workflow environment with recipe-based set-up that makes Xradia 410 Versa easy for users with a wide variety of experience levels.
The Advanced Reconstruction Toolbox is an innovative platform on your ZEISS Xradia 3D X-ray microscope (XRM) or microCT for accessing advanced reconstruction technologies. Unique modules leverage deep understanding of both X-ray physics and customer applications to solve some of the hardest imaging challenges in new and innovative ways.
With the Advanced Reconstruction Toolbox, you are able to:
- Improve data collection and analysis for accurate and faster decision-making
- Greatly enhance image quality
- Achieve superior interior tomography or throughput on a broad class of samples
- Reveal subtle difference through improved contrast-to-noise
- Increase speed at an order of magnitude for sample classes requiring repetitive workflow
These optional modules are workstation-based solutions for easy access and usability:
ZEISS OptiRecon is an implementation of iterative reconstruction that greatly increases acquisition throughput, while optimizing image quality.
ZEISS OptiRecon allows you to achieve good image quality with about one quarter of the data acquisition time for many samples typically found in the academic and industrial energy, engineering, natural resources, biological, semiconductor, manufacturing, and electronics research fields.
Slide right to left to compare:
4X Throughput for Mining Powder
Flexibility for Rock Exploration
– Image Quality vs. Throughput
4X Throughput for Battery Research
Flexibility for Battery Research
– Image Quality vs. Throughput
2X Throughput for 2.5D Semiconductor Package (50 mm x 75 mm)
Improved Image Quality for 2.5D Semiconductor Package (50 mm x 75)
2X Throughput for Semiconductor Package
Improved Image Quality for Semiconductor Package
ZEISS DeepRecon for ZEISS Xradia X-ray systems is the first commercially available deep learning reconstruction technology. It enables you to increase throughput by an order of magnitude (up to 10X), without sacrificing novel XRM resolution at a distance, for repetitive workflow applications. DeepRecon uniquely harvests the hidden opportunities in big data generated by your Xradia platform and provides significant AI-driven speed or image quality improvement.
One of the principal challenges when applying X-ray microscopy to solve academic and industrial problems is a compromise one needs to make between imaging throughput and image quality. High resolution 3D X-ray microtomography acquisition times can be on the order of several hours, which can lead to challenging return-on-investment (ROI) calculations when weighing the relative advantage of high accuracy 3D analysis with cheaper, less capable analytical techniques.
To tackle this issue, optimization of each step in the production of actionable information from these microscopes is required. For 3D X-ray microtomography, these steps typically consist of sample mounting, scan setup, 2D-projection image acquisition, 2D to 3D image reconstruction, image post-processing and segmentation, and final analysis.
Xradia Versa architecture uses a two-stage magnification technique to enable you to uniquely achieve resolution at a distance (RaaD). Enlarge sample images through geometric magnification as with conventional micro-CT. In the second stage, a scintillator converts X-rays to visible light, which is then optically magnified. Reducing dependence upon geometric magnification enables Xradia Versa instruments to maintain submicron resolution at large working distances. This enables you to study the widest range of sample sizes effectively, including within in situ chambers.
- Non-destructive 3D imaging to preserve and extend the use of valuable samples
- High spatial resolution down to <0.9 µm and voxel size to 100 nm
- Advanced contrast solutions for low Z materials and soft tissue
- Industry-leading 4D and in situ capabilities for flexible sample sizes and types
- Scout-and-Scan™ control system for easy-to-use workflow set-up, ideal in multi-user environments
- Heavy load sample stage and extended source and detector stage travel
- Minimal need for sample preparation
- Easy navigation through multiple magnification detector system
- Continuous operation through automated multiple point tomography and repetitive scanning
- High speed reconstruction
- Optional Versa In Situ Kit organizes the facilities that support environmental chambers (such as wiring and plumbing) to enable maximum imaging performance and ease set-up while delivering the highest 3D resolution for in situ applications
- Autoloader option enables you to program and run up to 14 samples at a time to maximize productivity, automate workflows for high volume scanning
- Throughput with image quality
Image and quantify microstructure evolution in 3D and 4D (time-based). RaaD enables resolution to be maintained for imaging within in situ rigs, including sub-interior regions of your samples, across a large variety of material types and sizes.
Characterize and quantify porosity and micro rock structures to achieve the most accurate 3D submicron characterization of rock pore network for “digital rock” simulations and in situ multiphase fluid flow studies. Use X-ray vision to understand crack propagation in ceramics, metals and building materials. Perform quantitative, high resolution, three-dimensional microstructural analysis of relatively large samples at high resolution in situ.
Characterize specimens in high definition for developmental biology, virtual histology and neural network mapping. High contrast detectors coupled with phase contrast imaging deliver unprecedented cellular-level detail.
Image failures and microstructural detail in 3D, navigate to a location anywhere within intact sample, perform non-destructive virtual cross sections on large boards and advanced 3D packages. Xradia Versa offer the industry’s highest resolution, non-destructive solution for 3D submicron imaging that complements or replaces physical cross sectioning methods.
Easily scout a region of interest and specify scanning parameters within the Scout-and-Scan Control System. Take advantage of the easy-to-use system in your central lab where users may have a variety of experience levels.
- Internal camera for sample viewing
- Recipe control (set, save, recall)
- Multiple energies
- Multiple samples with Autoloader option
- Micropositioning capability with a simple mouse click
ZEISS recommends Dragonfly Pro from Object Research Systems (ORS)
An advanced analysis and visualization software solution for your 3D data acquired by a variety of technologies including X-ray, FIB-SEM, SEM and helium ion microscopy.
Available exclusively through ZEISS, ORS Dragonfly Pro offers an intuitive, complete, and customizable toolkit for visualization and analysis of large 3D grayscale data. Dragonfly Pro allows for navigation, annotation, creation of media files, including video production, of your 3D data. Perform image processing, segmentation, and object analysis to quantify your results.
ZEISS ORS Dragonfly
Outstanding 3D visualization with best-in-class graphics
file size: 561 kB
Results 1 - 1 of 1