Sophisticated, technical and decorative surfaces for your application
Category

Surface finishing

Sophisticated, technical and decorative surfaces

We develop the right coating concept for your product that meets the highest expectations for decorative and technical surfaces – regardless of whether it is a single item or series production.

Technology consultation

Surface finishing process from ZEISS

In their many areas of application, mechanical components are often exposed to major environmental influences. Now it depends on how resistant their surfaces are: the better the protection, the more durable the component. The higher the quality of the coating, the greater the range of applications.

Surface finishing process from ZEISS

Anodization processes

With a galvanic or chemical treatment, you increase the durability and resistance of your products. We can tell you which is the right process. Our electroplating department uses ultra-modern machinery and can anodize part sizes up to 1700 mm using various processes.

  • Anodizing product safety process (as per DIN 17611)
  • Bilatal
  • Hard coat anodizing
  • Ematal / ematal, black
  • Anodizing, multicolored

Nickel plating process

Nickel can be used universally in surface finishing and offers a wide range of properties that enhance any workpiece. It increases chemical resistance, protects against corrosion and wear, and increases lubricity – to name a few. We are proficient in all the processes required for this and can advice on the possible applications of nickel coating.

  • Chemically nickel medium phosphor
  • Chemical blackening of nickel medium phosphor
  • Chemically nickel high phosphor
  • Chemically nickel high phosphor plastics and ceramics

  • Gloss nickel
  • Sulfamate nickel
  • Electroforming nickel

Precision cleaning

By using the latest cleaning processes we fulfill your requirements regarding cleanliness of precision-engineered components. All the cleaning systems we use are optimally matched to precision mechanical component cleanliness. On request, we clean and pack your individual parts in clean rooms up to ISO class 5.

  • Cleaning of workpieces
  • Cyanide electrolytic degreasing
  • Precision cleaning
  • Inner pipe cleaning
  • Teflon degreasing (HFE cleaning)

Reprographic and microstructure technology

You want to have it exactly? Then we will inspire you with our custom manufacturing. We make your individual wishes for sophisticated structures possible.

  • Sputtering technology
  • Electroforming of photolithographic structures (nickel / gold)
  • Anisotropic etching of silicon
  • Mold etching parts from copper alloys and stainless steel materials

Printing technology

Do you need information applied to your workpiece that will last for a long time? Then we will advise you on the appropriate printing technology for fonts or characters.

  • Screen printing
  • Pad printing

Painting technology

Coatings provide the visual finish for any workpiece, but above all they should offer lasting protection: against corrosion, impacts and scratches, but also against chemical environmental influences. In order to ensure that the paint adheres well and has the necessary hardness, we choose the best process for each workpiece. From matte to gloss – according to your wishes.

  • Smooth lacquer
  • Textured lacquer
  • Bonded lacquer / Teflon coating
  • Enameling
  • Antireflective lacquers

Mechanical pre-treatment

Prior to any surface treatment, the workpiece must be prepared in such a way that any further finishing meets a viable base. That is why we grind, blast and polish your workpieces.

Technology consultation

True to our promise to provide you with leading-edge technology, we are committed to challenging the limits of what is possible on a daily basis. We achieve this through a team of specialists who have years of practical experience, but also feel at home on scientific committees.

Modern Factory: Male Industrial Engineer Explains to Female Project Supervisor Functions of the Machine Part Comparing it to one on Computer Screen. They use CAD Software for Design, Development

Get in touch with us

We look forward to your call.

+49 3641 64-2646

Contact us

You can get in touch with your questions here.

ZEISS job openings

Related topics

Finish machining of powder-coated individual parts

Finish machining of powder-coated individual parts

Precision without flaws

Mechanical high-tech components

Mechanical high-tech components

Precision parts and assemblies for your requirements

Turning | RoHS-compliant individual parts

Turning

RoHS-compliant individual parts