Product Family

ZEISS VISALIS Phaco And Vitrectomy Systems

Experience the difference

VISALIS® 500 from ZEISS phaco and vitrectomy systems incorporate a series of functions designed to optimize your workflow efficiency and provide reliable support throughout the day.

  • APM technology
  • Hot swap flexibility
  • Modular system
  • Phacoemulsification

    ZEISS VISALIS S500

    VISALIS S500 is a reliable phaco system with premium cataract technology.

  • Phacoemulsification and vitrectomy

    ZEISS VISALIS V500

    VISALIS V500 is equipped for both cataract surgery and retina surgery, eliminating the need for external modules and saving space in the OR.

  • Cost effective phacoemulsification

    ZEISS Visalis 100

    The ZEISS Visalis 100 is tailored to meet the economic needs of your practice and provide reliable phaco in your OR.

ZEISS VISALIS phaco and vitrectomy system

Optimized phaco efficiency

APM® (Advanced Power Modulation) is an automated pulse shaping modulation technology that combines burst and pulse ultrasound energy into one modulation pattern. It provides the efficiency of the burst to impale the nucleus and the speed of pulse to remove the quadrant.

Overall, APM lowers the measured effective phaco time (EPT) by as much as 73%, accelerates cataract removal and improves anterior chamber stability by 32%.1

Hot swap flexibility

Hot swap flexibility

One cassette for both pumps and for combined anterior and posterior surgery. Swap intraoperatively between the peristaltic and venturi pump, as needed.

Designed for posterior surgery, hot swap capability facilitates the low flow or high cut-rate techniques while working close to the retina. The aspiration and cutting rate can be controlled independently with the footswitch.

ZEISS VISALIS V500

Modular phaco and vitrectomy system

In addition to premium cataract technologies, ZEISS VISALIS V500 features leading posterior vitrectomy functions – eliminating the need for external modules and saving space.

The ZEISS VISALIS S500 can be upgraded to a ZEISS VISALIS V500 at any time, on site. You can expand into vitreoretinal procedures whenever you want.

ZEISS Visalis 100

The capturing followability1 of the ZEISS Visalis 100 attracts and continuously engages nucleus fragments on the phaco tip. Unique in its class, it enables a 1.8 mm incision, which can potentially reduce surgically induced astigmatism and accelerate wound healing.

Adaptive Power Control measures and stabilizes the tip stroke, resulting in potentially less stress for your patient's eye. The wide variety of reusable accessories ensures that the ZEISS Visalis 100 is tailored to meet the economic needs and cost-effectiveness of your practice.

Downloads

    • VISALIS 500 Family Brochure EN

      Pages: 12
      File size: 985 KB
    • Visalis 100 Brochure EN

      Pages: 8
      File size: 621 KB
    • VISALIS 500 Family and VISALIS 100 Accessory Catalog EN

      Pages: 18
      File size: 1 MB

Specifications

ZEISS VISALIS phaco and vitrectomy systems

  • ZEISS VISALIS
    S500
    V500
    Vitrectomy
    Handpiece type
    Pneumatically powered guillotine cutter
    Cutting rate
    From 60 to 1600 cuts/min (anterior)
    From 60 to 4000 cuts/min (posterior)
    o
    Actuating medium
    Pressurized air from external source with operating pressure 220 kPa (2.2 bar)
    Surgery mode
    Fixed or linear control from 0 to preset of the flow and/or vacuum level via system footswitch, aspiration rise time 0.5 to 12 sec. in the fixed control mode
    Basics
    Height
    260 cm (IVP extended)
    Input voltage 100 - 240V (+/-10%)
    211 cm (IVP retracted)
    Width x depth
    51 cm x 50 cm
    Fuse T 6-3A – H 250 V
    Weight
    94 kg
    Input pressure 5 - 8 bar
    Phacoemulsification
    Handpiece type
    4 piezoelectric crystals, approx. 40 kHz; stroke from 0 to 100μm
    Surgery modes
    Fixed or linear control from 0 to preset of the U/S power via system footswitch
    U / S mode
    Continuous, pulse, burst, advanced power modulation (APM)
    Irrigation / Aspiration
    Gravity fed
    Electrically adjustable IV pole
    Combined fed
    Pressurized air into BSS bottle
    Inflation pressure
    From 15 to 80 mmHg
    Aspiration pump type
    Peristaltic & Venturi
    Vacuum / Flow rate range
    Vac 1 and Vac 2 5 to 600 mmHg / 2 to 60 cc/min (peristaltic pump only)
    Surgery mode
    Fixed or linear control from 0 to preset of the flow and/or vacuum level via system footswitch, aspiration rise time 0.5 to 12 sec. in the fixed control mode
    Diathermy
    Type
    Bipolar generator; 2 MHz, 9 W (200 Ohm load)
    Handpiece type
    Bipolar micro-forceps, thin bipolar pencils, intraocular diathermy
    Scissors
    Handpiece type
    Pneumatically powered cutter
    o
    Cutting mode & rate
    Horizontal scissors; from 60 to 320 cuts/min
    o
    Actuating medium
    Pressurized air from external source with operating pressure 200 kPa (2 bar)
    o
    Illumination
    Type
    Two independent light sources, HID xenon lamp, light 1: 4300 K; light 2: 5000 K
    o
    Intensity adjustment
    16 steps, motorized aperture
    o
    Filters
    User selectable green filter, IR-UV blocking filter
    o
    Selectable retinal protection filter (blue barrier filter)
    o
    Tamponade
    Air injection
    o
    Pressure source / injection pressure
    Integral rotary fan compressor / from 5 to 80 mmHg
    Silicone oil injection
    o
    Pressure source / injection pressure
    Pressurized air from external source / from 40 to 500 kPa (0.4 to 5 bar)
    o

    ✔ standard
    O optional

  • ZEISS Visalis 100

    Dimensions
    Height: 205 mm, width: 400 mm, depth: 405 mm
    Weight
    12.5 kg
    Irrigation
    Gravity fed fluid delivery; eye pressure determined by height of irrigation source
    Solenoid valving element
    Aspiration
    Peristaltic pump
    5 to 500 mmHg vacuum range
    Flow rate from 2 to 50 cc / min
    Surgery mode with fixed or linear control from 0 to preset of the flow and / or vacuum level via Double Linear Footswitch II
    0.5 to 12 s aspiration rise time
    Phacoemulsification
    4 Piezoelectric crystals handpiece with frequency approx. 40 kHz
    U/S mode with Continuous, Pulse, Burst and with fixed or linear control from 0 to preset
    U/S Timer / Timer EPT from 00:00:0 minutes to 59:59:9 minutes
    Vitrectomy
    Handpieces type with pneumatically powered guillotine cutter
    Cutting rate from 60 to 700 cuts per minute
    Actuating medium with pressurized air from integrated air compressor
    Diathermy
    Adjustable bipolar power from 9 W @ 200 Ω, 5 to 100%
    Linear control with Double Linear Footswitch II
  • 1

    Customer survey / data on file